用户登录
期刊信息
  • 主管单位:
  • 上海市教育委员会
  • 主办单位:
  • 上海理工大学、上海市能源研究会、上海电气(集团)总公司
  • 主  编:
  • 陈康民
  • 地  址:
  • 上海市军工路516号
  • 邮政编码:
  • 200093
  • 联系电话:
  • 021-55272843
  • 电子邮件:
  • eribjb@usst.edu.cn
  • 国际标准刊号:
  • 1008-8857
  • 国内统一刊号:
  • 31-1410/TK
  • 邮发代号:
  • 单    价:
  • 5.00
  • 定    价:
  • 20.00
预处理对河道底泥固化效果的影响
Effects of the pretreatments on the river sediment solidification
投稿时间:2017-04-22  
DOI:10.13259/j.cnki.eri.2019.02.002
中文关键词:  河道底泥  预处理  固化  抗压强度
英文关键词:river sediment  pretreatment  solidification  compressive strength
基金项目:上海市自然科学基金资助项目(14ZR1428900);上海市科委能力建设项目(13230502300);教育部留学回国人员科研启动基金资助项目
作者单位E-mail
李玉祥 上海理工大学 环境与建筑学院, 上海 200093  
陈维芳 上海理工大学 环境与建筑学院, 上海 200093 chenweifang@usst.edu.cn 
陈再 上海理工大学 环境与建筑学院, 上海 200093  
曲妍 上海理工大学 环境与建筑学院, 上海 200093  
何飞飞 上海理工大学 环境与建筑学院, 上海 200093  
摘要点击次数: 2941
全文下载次数: 2824
中文摘要:
      为了通过预处理改变底泥的理化性质,增加底泥固化后抗压强度,实现底泥的资源化利用,比较了3种底泥预处理方法(Fenton氧化、热处理、淋洗)对底泥中有机质的质量分数、重金属总质量、重金属形态分布,特别是对底泥固化后抗压强度的影响。结果表明:固化后抗压强度与底泥中有机质的质量分数直接相关;可降低底泥中有机质的质量分数的预处理方法(Fenton氧化、热处理)对提高底泥固化后抗压强度效果较好,底泥固化后抗压强度高达2.7 MPa; 鼠李糖脂淋洗虽然能够有效去除底泥中的重金属,但是淋洗剂中的有机物反而使底泥中有机质的质量分数增加,对固化不利。因此,Fenton氧化和热处理均可用作提高底泥固化强度的预处理方法,且固化后试样重金属浸出毒性低,对环境影响小。
英文摘要:
      Due to its physical and chemical property changes through pre-treatments, effects of pre-treatments including Fenton oxidation, heat treatment and washing on organic content, heavy metal content, heavy metal speciation and compressive strength after solidification were compared in this paper with the purpose of increasing the compressive strength of solidified sediment, which could realize the sediment reuse. The results showed that compressive strength of the solidified sediment was closely related to its organic content. Pretreatments, such as Fenton oxidation and heat treatment, which could reduce the organic content had the best effect on improving compressive strength. The highest compressive strength of 2.7 MPa could be reached. By comparison, rhamnolipid washing had effect on heavy metal removal. However, it resulted in the rising of organic content and thus had adverse effect on the solidification. Therefore, Fenton oxidation and heat treatment were recommended as the pretreatment to further increase the compressive strength. In addition, the solidified samples with low heavy metal leaching had less impact on the environment.
HTML   查看全文  查看/发表评论  下载PDF阅读器
关闭